BUTCHERING, SKINNING & TANNING

MOVE TO THE KILL: 

1)  Veteran woodsmen tells us of certain labour saving principles 

practiced by Indians. 



MOVE YOUR CAMP TO YOUR KILL AND NOT VICE VERSA.



2)	If you MUST transport the carcass first reduce the weight by eating

heart, liver, kidneys skull meat, intestines and leg bone marrow.



3)	ROLL; DON'T CARRY GAME DOWNHILL. On snow or ice use the pelt of one

animal as a sled to drag another.



Once scraped of fat and stretched between trees a hide can be green-dried in a

day. Spread under a sleeping bag = ideal insulator.



WORKING ON YOUR OWN:



1)	Lifting a large animal takes considerable effort. If on your own you

may have to skin and gut the animal on the ground.



2)	To prevent the carcass from rolling, cut off the feet of hoofed

animals and place them under it. 



3)	Lay the carcass down a natural slope, scoop an impression in the

ground in which to place a collecting tin or other vessel so that the animal

bleeds into it.



4)	Follow the same pattern of incisions in the hide then skin the animal

from one side to the backbone, spread out the hide and then roll the animal on

to it to finish skinning the other half- this helps keeps the meat from rubbing

on the ground.



CAN'T MOVE THE DEAR DEER!:



Now if you can not transport your deer to your camp right away, you MUST

take some precautions such as to lay it on its stomach on some pieces of wood,

so as to raise it to MAKE SURE that it is well ventilated to dry and

cool off.



DON'T HANG IT UP, AND MAKE SURE you cover it very well with many spruce

branches held in place with bigger logs even with a rope if need be.



Otherwise the scavengers will make it disappear in one day, believe it or not 5

or 6 crows can clean a deer in one day.



HOW TO CARRY DEER:



THE WORST METHOD IS to tie its legs together and using a 12 foot pole

between the legs you & your partner tries to carry it. The continuous

swinging motion of the deer will nearly kill you.



1)	THE TASK IS TWICE AS EASY if you use 2 poles to tie the legs and you

then carry the weight on your shoulders and to avoid the swinging motion.



2)	You just march on the same footstep rhythm or you can use this

different method which is to make a net under the deer using a rope between the

2 poles in which you carry the deer instead of tying it to the poles you tie it

to the stretcher by the neck.



HOW TO CARRY IT ALONE?: (Call Tarzan)



1)	If you are alone and can not get help from the above nor Spock to

beam it up, then first, don't try to drag it on the floor unless the deer is

very small, it will get tangled up everywhere.



2)	Don't try to obstinate yourself unless you are Hulk to drag a 175 to

200 pound deer, you only risk the hearth attack.



3)	Move your camp to the kill is the logical choice if in emergency even

without it.



TRICK TO MOVE IT IF ALONE:

TO CUT THE WEIGHT IN HALF BY:

1)	Try this trick which will cut the weight in half. Search for 2 small

tree about 15 feet long with a trunk slightly bent, if not, cut 2 straight

trees that you cut the ends in #bevel# so that they slide better.



Place them about 20 inches apart and tie a rope at every foot between them.

Roll your deer on this stretcher stomach upward and attach it firmly by the

legs and the neck so that it does not slide downward.



2)	If your rope is long enough cut a piece which you will attach to the

handles so as to help you to support the weight on your shoulder as some kind

of harness.



You will then note that a man of average strength can by use of this method

carry a deer of 200 pound without heart attack or total exhaustion.



REMOVING OF THE SKIN:



BUTCHERING TIPS:



1)	Hundred of pounds of meat is lost because the amateurs does not know

how to carve the animal properly, or because he has not opened and cleaned the

animal as soon as killed.



Or using bayonet type of knife to open an animal thus perforating the intestine

and spoiling the meat to no avail.



BUTCHERING TIP 1:  



1)	Too many hunters spoil the taste of the games by using the

same knife to remove the #glands# located on the deer legs and to skin the deer

itself. Correct this error by using a small knife really sharp to

extract the gland.



DEER BUTCHERING:



Deer or Moose meat spoils very fast if left on the ground.



1)	So if you can not hang the deer on a tree, drag the body to a dead

trunk & put it on it or upon a tree stump or a group of shrubs would do

it.



If too heavy push branches under the body & use a branch or pole as

leverage. It does not matter that the hind legs drag on the ground.

2)	A good hunter does it in 5 minutes and by dirtying only one hand but

if it is your first butchering, it will take 1/2 hour and you'll be a mess.



3)	Start first by placing the deer in proper position which is down

toward a small slope which will help the cleaning up.



4)	Using a rope you will spread open the hind legs by tying them to a

small tree near by. Thus installed the deer offers you its abdomen and rib

cage.



5)	It is the abdomen that MUST be emptied of its content if you

want to avoid spoiling the meat. You start by the removing of the genital

organs of the male.



6)	To empty a deer, you open the deer from the #sternum# to the tail

base, from the sternum precisely where the bony part of the rib cage ends.



7)	When the opening is big enough to insert the index and the major

finger of your left hand, these fingers will push downward while lifting

strongly the skin upward.



8)	Meanwhile the sharp knife turned upward will be introduced between

your fingers and will work downward all the way to the #anus# MAKING SURE

NOT TO PERFORATE THE INTESTINES.



9)	You will gradually open the hole about 10 inches on each side. You

will then notice that the #viscera# enveloped in a transparent pouch have a

tendency to come out of the open stomach.



10)	You MUST MAKE SURE not to perforate this envelope and to work in

such a way as to let the stomach and the intestines be removed in one block.



11)	Otherwise the guts will come off the pouch and will make your task

much more difficult & messy.



12)	You MUST disengage all the pouch (diaphragm) so as to

let it easily come out of the abdomen.



13)	In order to help you along, you introduce you open hand between the

skin and the pouch and direct it along the back bone. Then you cut off the

#oesophagi#.



14)	It is a gut of about 1 1/2 inch in diameter located at the top end

of the stomach & connected to the #pharynx#.



15)	Once this done you grab with your left hand the end of the

#oesophagi# connected to the stomach and you pull firmly downward. The pouch

containing the intestines and guts should come out fairly easily.



16)	If the deer is heavy, you can turn it sideways to help the clearing

of the #viscera#. Once they are completely out of the deer you then cut the

#big intestine# as closely as possible from the #anus#.



Clean all blood and dry it, using dry grass, moss. Now all you have to do is to

detach the liver which has stayed stuck behind the stomach.



DEER BUTCHERING TIP 2:



Once at camp with your deer REMEMBER that is preferable to let it age a

bit before butchering it; about 8 to 10 days, the meat will be much more

tender. Of course we assume that you have emptied the deer in the first

place.



AT CAMP BUTCHERING:



1)	Once at camp you finish the butchering job by opening the rib cage to

remove the hearth and tongue.



2)	Removing the deer of any further scrap and then you hang it up to a

bar located between 2 trees at about 12 feet high, either by the head or hind

legs through which you have passed a pole at the #tendons d"Achilles#.



But don't forget to cover it up so as to avoid scavengers etc. Use a tarpaulin

to protect it from snow or rain as well.



3)	You finish the opening with the knife then use the axe to open the

thorax by cutting the sternum all the way to the neck.



4)	To remove the lungs and the heart; cut the jugular vein which is a

tube about 1 inch in diameter, once cut; insert your fingers and pull downward

and all the breathing system will come out of the thorax.



5)	Clean the inside of the deer of the remaining parts of the lungs,

other pouches and of all blood.



6)	As for the heart, it will be bled by simply compressing it strongly.

Finally remove the #metatarsiennes glands# located at the bottom of the

#tendons d'Achille# which you use to rub your boots as # 1 waterproofing.



BUTCHERING TIP 3: 



Whatever is not used either hearth liver, lungs etc. of all game MUST

NEVER be left in the wood but burned since they will give many diseases to

other games, so MAKE SURE to get rid off them.



WARNING HEALTH HAZARDS DISEASED ANIMALS:



1)	There are lymph glands in the cheeks of all animals more noticeable

on large ones. If large and discoloured they are signs of illness.



Any animal that is distorted or discoloured about the head such as rabbit with

the symptoms of myxomatosis MUST BE BOILED.



2)	There is then little risk of infection from eating it. But care

should be taken in preparation when there is a risk.



3)	It is ESSENTIAL that any cut or sore in your skin be covered when

slaughtering or handling meat.



4)	For if an animal carries disease a break in the skin provides easy

entry to your beautiful body!



PREPARING THE KILL:



1)	No part of a carcass should be wasted. Careful preparation will give

you the maximum food value and make full use of the parts you can not eat. Set

about it in four stages.



SKINNING:

1)	So that the hide or fur can be for shelter or clothing.

Pigs are not skinned because they have a useful layer of fat under the skin.

Birds are plucked but not usually skinned.



GUTTING:



To remove the gut and recover the offal.



JOINTING:



To produce suitable cuts for cooking by various methods



BLEEDING:



1)	Which is ESSENTIAL if the meat is to keep & without which

the taste is very strong.



2)	DO NOT WASTE BLOOD. It is rich in vitamins and minerals including

salt, that could otherwise be missing from the survivor's diet. Cattle food is

an important part of the diet of many African herdsmen.



3)	Cannibals who drank their enemies' blood found vision and general

health improved and giddy spells, induced by vitamin deficiency, cured.



4)	The blood provided the missing vitamins and minerals. But today with

aids they would drink death & beside the Bible forbids us to drink blood.



ANY ANIMAL WILL BLEED BETTER IF HUNG WITH THE HEAD DOWN.



1)	Tie ropes around the hock (Not the ankle, it will slip off)

& hoist it up to a branch or build a frame, placing a receptacle beneath to

catch the blood.



2)	For a frame you need a strong structure. Drive the posts into the

ground and lash them firmly where they cross to make A frame and then rest the

horizontal bar on top. 



3)	Bleed the animal by cutting the jugular vein or carotid artery in its

neck. When the animal is hanging these will bulge more clearly & should be

easy to see.



The cut can be made either behind the ears, stabbing in line with the ears to

pierce the vein on both sides of the head at the same time or lower down in the

V of the neck, before the artery branches.



Unless you have a stiletto type knife the latter is best. An alternative is to

cut the throat from ear to ear.



4)	This has the disadvantage to cut through the windpipe and food from

the stomach may come up & contaminate the blood which you are trying to

save, but if your knife does not have a sharp point it may be necessary. It

is particularly important to very thoroughly bleed pigs.



5)	If blood remains in their tissues, which have a high moisture and fat

content, it will speed deterioration of the flesh.



GUTTING:



1)	With the carcass still suspended remove the gut and recover the

offal. Pinch the abdomen as high as possible and in the pouch of flesh you have

raised make a slit big enough to take two fingers.



2)	Do not stab into the flesh or you may cut through to internal organs.

Insert the fingers and use them as a guide for the knife to cut upwards towards

the anus.



3)	Now cut downwards in the same way, using the hand to hold back the

gut, which will begin to spill outwards see PIX #? 112. Cut down as far as the

breastbone. The initial incision, made in the pinched-up flesh, needs only

accommodate two fingers.



4)	Cut in the same way as skinning  before  First up, then down. The

back of the hand prevents the gut from spilling.



5)	Let the gut spill out, allow it to hang down so that you can inspect

it. Remove the 2 kidneys and the liver.



6)	The chest cavity is covered with a membrane and easily missed in

small game. Cut through the membrane and remove the heart, lungs and

windpipe.



7)	Ensure that the anus is clear you should be able to see daylight

through it. Push a hand through with large animals. The carcass is now clean

& you are a bloody mess.



JOINTING MEAT: 



1)	Large animals can be quartered by first splitting down the backbone

and then cutting each side between the tenth and eleventh rib.



The hindquarters will contain steaks rump & filet and the choicer cuts, the

forequarter meat is more stringy and needs slow cooking to make it tender



2)	The cuts into which a carcass is divided will differ according to the

kind of animal and the cook's preference.



1) Fillet or undercut:	The most tender meat only 1% is fillet. Ideal for

preserving.  



2) Sirloin:	Next most tender. Fat free strips can be cut for

preserving.



3) Rump:	Ideal for frying, little cooking is needed. Can also be dried

in strips.



4) Topside: Muscle from the top of the leg. Cook slowly, it tends to be

tough. Cut into cube for boiling.



5) Top rump:	Muscle from front of thigh. As for topside. 



6) Silverside:	Muscle on the outside of thighs. Good roasting.



7) Hind flank:	Belly, ideal for stews & casseroles.



8) Leg:	Tough and sinewy cut into cubes and stew.



9) Flank:	Muscular extension of the belly. Ideal for stews Usually tough

so needs long simmering to make tender.



10) Brisket:	Same as Flank.

11) Shin:	Foreleg, best cubed for stews.  



12) Neck:	Stews.



13) Clod:	Ideal for stews. Contains less tissue than leg. Cook slowly.



14) Chuck and blade: Quite tender but usually cut up as stewing steak.



15) 8 ribs: Ideal for roasting but cook slowly.



HANGING:



1)	Offal should be eaten as soon as possible but the rest of the meat is

better hung.



2)	In moderate temperature leave the carcass hanging for 2-3 days. In

hot climate it is better to preserve it by cooking it straight away.



3)	When the animal is killed, acids released into the muscles help to

break down their fibre, making the meat more tender.



THE LONGER IT IS LEFT THE MORE TENDER IT WILL BE AND EASIER TO CUT WITH MORE

FLAVOUR TOO AND HARMFUL PARASITIC BACTERIA IN THE MEAT WILL DIE.



4)	You MUST keep flies off the flesh; if they lay eggs on meat it will

spoil quickly.



OFFAL  LIVER:



1)	Liver is best eaten as soon as possible. Remove the bile bladder in

the centre.



2)	It is quite strong and can usually be pulled off without difficulty-

but be careful, the bile will taint the flesh with which it comes in contact.



3)	If any animal has any disease they will show up in the liver.



4)	AVOID any liver that is mottled or covered with white spots. If only

some is affected, cut it off and eat the reminder.



5)	LIVER IS COMPLETE FOOD, CONTAINING THE ESSENTIAL VITAMINS AND MINERALS.





If eaten raw no food value is lost. It requires little cooking.



STOMACH: (TRIPE):



1)	Stomach takes little digesting, so is a good food for the sick or

injured. Remove the stomach contents which make ideal "invalid" food.



2)	Wash the tripe and simmer slowly with herbs. The contents may sound

unpalatable but could save an injured person's life for the animal has done

most of the hard work of breaking the food down.



3)	Lightly boiled, stomach contents are nourishing and easily

digestible. In some countries pigs are fed nothing but apple prior to

slaughter.



4)	They are cooked with the stomach still in. The subtle flavour of

apple impregnates the meat. The stomach is removed after cooking and the

contents used as sauce.



KIDNEYS:



They are a valuable source of nourishment & ideal flavouring for stews.

Boil them with herbs.



The white fat surrounding them (suet) is a rich food source. Render it

down to use in the preparation of pemmican.



MELTS:



They are the spleen, a large organ in the bigger animals. It has limited food

value and is not worth bothering about in the small games such as rabbits. It

is best roasted.



LITES:



Lites are the lungs of the animal, perfectly good to eat but not of great food

value. Any respiratory complaints will show up in the lungs.



Do not eat any mottled with black and white spots. Healthy lungs are

pink and blemish free and best boiled. They could be set aside for fish or trap

bait.



HEART:



A tightly packed muscle with little or no fat. Roast it or use its distinctive

flavour to liven up the stew.



INTESTINES:



1)	They consist of lengths of tubes and are best used as sausage skins.

Turn them inside out and wash them. Then boil them thoroughly.



2)	Mix fat and meat in equal proportions and then stir in blood. Stuff

the mixture into the skin and boil them well.



3)	Before putting them into boiling water add a little cold to take it

just off the boil, this will counter any risk of the skins bursting.



4)	This makes a highly nutritious food which if smoked will keep for a

long time. Dried intestines can be used for light lashings.



SWEETBREADS:



Are the pancreas or thymus gland, distinctive in larger game. Many people

consider it a great delicacy and it is delicious boiled or roasted.



TAIL:



Skin and boil to make an excellent soup for it is full of meat and gelatine.



FEET:



Feet are chopped off during slaughter but should not be wasted. Boil them up to

make a good stew.



Clean dirt from hooves or paws and remove all traces of fur. Hooves are a

source of nutritious aspic jelly.



HEAD:



1)	On larger animal there is a good deal of meat on the head. The cheeks

make a very tasty dish. The tongue is highly nutritious.



2)	Boil it to make it tender and skin before eating. The brain will

brawn and will also provide useful solution for curing hides. All that is left

or the whole head with small animals should be boiled.



BONES:



All bones should be boiled for soup. They are rich in bone marrow with valuable

vitamins. They can also be made into tools.



PREPARING SHEEP-LIKE ANIMALS:



Follow the instructions for larger animals and then:



1)	Split in two down the line of the spine, keeping exactly to the

centre of the backbone.



2)	Remove rear leg. Try to cut through the ball and socket joint.



3)	Remove the front leg. There is no bone to cut through. Follow the

line of the shoulder blade.



4)	Cut of neck 

5)	 Cut off skirt (loose flesh hanging below the ribs.)



6)	Cut between each rib and between the vertebrae. This gives you

chops.



7)	The fillet, lying in the small back, is the best meat for

preserving.



PREPARING PIG:

(NOT KOSHER? BORF!)



1)	Do not attempt to skin a pig. Gut it first then place it over the hot

embers of a fire and scrape the hair off.



2)	Hot water will help loosen the hair. It should be only just hotter

than your hand can bear.



3)	Water that is too hot will make the hair more difficult to remove.

Pigs attract many parasites: ticks, crab lives and worms so cooking MUST

MAKE SURE of killing them. Boiling is therefore the best way of cooking

pork.



PREPARING SMALL ANIMALS:



Follow the basic procedures as for larger animals they all need to be gutted.



PREPARING REPTILES:



1)	Discard internal organs which may carry salmonella. Reptiles can be

cooked in their skins. Large snake can be chopped into steaks and provide

useful skins.



2)	To prepare a snake, cut off head well down, behind poison sacs, open

vent to neck, keeping blade outwards to avoid piercing innards which will fall

clear. Skewer to suspend and ease of skin towards tail.



PREPARING BIRDS:



Birds are prepared in much the same way as animals. Though they are usually

plucked and cooked with the skin on instead of being skinned. Follow the

sequence below.



BLEEDING:



Kill birds by stretching their necks, then cut the throat and hang head-down to

bleed.



Or kill by cutting just under the tongue severing main nerve and main artery.

The bird dies easily and bleeds well.



WARNING ON CARRION:



Handle carrion eaters as little as possible they  are more prone to infection,

lice and ticks.



PLUCKING:



It is easiest straight after the killing while the bird is still warm. Hot

water can be used to loosen feathers except in the case of water-birds and

seabirds in which it tends to tighten them.



Keep feathers for arrow flights and insulation. Start at the chest. For speed

you can skin a bird but that wastes the food value of the skin.



DRAWING (REMOVING INNARDS):



Make an incision from the vent to the tail. Put your hand in & draw out all

the innards. Retain the heart and kidneys. Cut off the head and feet.



CLEANING FOWL OR RABBITS IN THE HOUSE:



1)	Here is a trick to help you get rid of all little hair of down that

somehow ALWAYS remain after skinning your rabbit, squirrel or

partridge.



2)	Take some scotch tape and roll in outward around you hand so that the

sticky part is on the outside then by manipulating this hand duster carefully

you will easily get rid of all the undesirable down and furs.



RABBIT SICKNESS = DANGER:



1)	Tularaemia this sickness is caused by a germ and it appeared in 1968.

Men can contact it from sick rabbits by direct contact with his hands or by

breathing the dust from infected wounds, or by tick stings or by eating the

meat not well cooked.



2)	So it is recommended to wet the rabbit before skinning it, so as to

avoid the dust and to prevent stings from tick by the use of rubber gloves and

to MAKE SURE it is properly cooked. If the rabbit presents abscess or

running lesions do not eat it but destroy.



PRESERVING PELT:



1)	The only good way to keep the skin once its has been cleaned off all

its fat and blood and well washed it is to let it dry in fresh air.



2)	When they are dry after 2 or 3 days they can be taken of their board

to which they were nailed to stop the shrinking then they are kept in a fresh

room till ready to use.



SKINNING: REMOVING THE SKIN 

STRIP TEASE TIME!: 



1)	Cool off the body as soon as possible and hang it by the head.



2)	Using a stick hold open the body so that the air can freely

circulate, spread also the hind leg so that the air can freely circulate

around.



3)	REMEMBER to hang the deer by the head then cut the skin around the

neck near the head.



Then cut the skin lengthwise under the neck down to the abdominal cavity. Next

you carve the inside of the legs in such a way that the 2 sides meet

together.



Start at the top. Use your knife as little as possible. One can remove or peel

of the skin in big chunk size by just pressing his fist between the flesh &

the skin.



4)	Keep on going toward the bottom till you get to the hind legs. This

method will give a clean job leaving hardly any hair on the skin.



SKINNING PART 2:



1)	It is easier to skin any animal when the flesh is still warm, as soon

as it has been bled. First remove any scent glands that might taint the meat.



2)	Some deer have them on their rear legs, just behind the knee. Felines

and canines have a gland on either side of the anus.



3)	It is wise to remove the testicles of male animals as they can also

taint meat.



BEFORE ATTEMPTING TO REMOVE HIDE: 



Cut firmly through the skin.



1)	Make a ring cut around the rear legs just above the knee. Take care

not to cut the securing rope.



2)	Cut around the forelegs in the same place.



3)	Cut down inside of the rear legs to the crotch, carefully cutting a

circle around the genitals.



4)	Extend the cut down the centre of the body to the neck. Do not cut

into the stomach and digestive organs: 



5)	Lift skin and insert two fingers beneath, set knife between, sharp

edge outward and draw it slowly down, cutting away from the body.



6)	Cut down the inside of the forelegs. Cutting in this way, you avoid

cutting prematurely into the gut cavity.



7)	The fingers lift the skin as you go and the knife, sharp edge

outwards, slips in and cuts along. 



8)	DON'T HURRY! Don't cut yourself. Don't damage the skin.



9)	Taking care will pay dividends later when you want to use the skin.

Now ease the skin of the rear legs, cut around the tail (you have already cut

around the genital area.)



10)	As soon as you can get  your hand right down the back of the carcass

use your fingers to separate flesh from skin.



11)	Now peel the skin from the front legs. You will have a single piece

of hide.



12)	As you work your thumbs down the neck they become bloody at the

point where the throat was cut. A strong twist of the head will separate it.

Cut through remaining tissues.



HOW TO SKIN WILD ANIMAL:



1)	As soon as the game is killed you hang it to a desired height by the

hind leg and make an incision with a sharp knife at knee height.



2)	Then draw a straight line to the #anus# but don't press to hard so as

not to open the animal right away.



3)	You will slide the blade between the skin and the flesh while pulling

fairly strongly with one hand with the help of your knife to cut the flesh that

stick too much to the body, using your closed fist between the flesh and the

skin is a good way to proceed.



4)	You keep this line right down to the upper part of the ear MAKING

SURE that you don't do any jerking movement.



5)	Remove the excess fat and end by a cut on each ear, then pull the

skin down to the nose which you cut then remove the skin completely.



6)	As soon as the skin is removed, you will make a cut on the stomach up

to the neck as to empty it completely from its intestine and of all the lower

part.



7)	Wash it with fresh water then cut the meat to preserve it as the food

chapter tells you to.



8)	As for the skin remove all excess fat and cover it with salt or

#alum# powder or oak bark powder, then roll it and keep it in a cool place, not

damp till the time for tanning 24 hours later.



WORKING ON YOUR OWN:



1)	Lifting a large animal takes considerable effort. If on your own you

may have to skin and gut the animal on the ground.



2)	To prevent the carcass from rolling, cut off the feet of hoofed

animals and place them under it. 



3)	Lay the carcass down a natural slope, scoop an impression in the

ground in which to place a collecting tin or other vessel so that the animal

bleeds into it.



4)	Follow the same pattern of incisions in the hide then skin the animal

from one side to the backbone, spread out the hide and then roll the animal on

to it to finish skinning the other half- this helps keeps the meat from rubbing

on the ground.



SKINNING SMALL ANIMALS:



1)	Rabbits and smaller animals can be skinned by making a small incision

over the stomach (be careful not to cut into the organs) Insert the

thumbs and pull outwards- the skin comes away easily.



2)	Free the legs and twist the head off. If you have no knife available

to make the first incision snap off the lower part of a leg and use the shard

edge of the break to cut the skin.



HOW TO SKIN AN ANIMAL:



1)	This operation MUST be done with precision if one wants to

keep the fur and requires much experience so practice on rabbits but you

MUST MAKE SURE that there is no blood on the fur.



2)	So in order to do avoid this don't hit the rabbit on the head since

the blood would accumulate at this spot.



3)	Your best way is to hang the rabbit with its head down &

hit it on the nose which will cause an haemorrhage  death.



4)	Skin it right away while you hang it by the back legs on hooks at

30cm distance.



The best tool is a skinning knife but if you don't have one then use a straight

one but MAKE SURE it is real sharp and keep the sharpening stone near by

since its blade becomes dull quickly in the skinning process. See PIX #? to

help along.



5)	After you have made the incisions (cuts) the way shown you

then start to pull off the skin till you feel a resistance which is caused by

the #membranes# or tissues  which then MUST be cut off as you go

along.



6)	Keep on pulling & cutting along but hold firm on the rabbit.

Animals are skinned most of the time all the same way and the skin of the head

and of the legs is usually not removed but a cut is made around them and the

rest of the skin is removed.



7)	In order to do the first cut (incision) you start at the

sternum and go down along one of the front leg. The second cut will go along

the other leg.



8)	The third cut will go from the hind leg to rejoin the other leg and

the last cut will go into the middle. With a rabbit the skin comes off with one

pull using only the occasional additional cut.



9)	However on most other animal the skin only comes off bit by bit as if

it was a sheath which was too narrow.



10)	You MUST then pull it off gently and when it resists call the

army by using your knife well sharpened. Go easy so as not to pierce the

skin.



11)	The last operation is to cut the skin around the neck and

around the legs.



12)	Once you have removed the skin you can remove most of the excessive

flesh but using the back of your knife, the rest of the flesh will come off

when you do the skinning operation.



13)	The next operation is the skinning which is to remove all the rest

of the fat or flesh that has clung to the skin or leather.



14)	In order to remove these pieces of meat easily dip the skin in a

solution of #borax# or salt.



15)	You prepare this solution by dissolving 500 grams of ordinary salt

into 8 litres of water. If you use #Borax# then use 30 gram of #Borax# for 4

litre of hot water and let it cool off before dipping the skin into it.



16)	The use of a shaker similar to the old washing machine would speed

things up and would also diminish the falling of hair.



17)	It is recommended before you dip the skins to stretch them on a

wooden rack while they are still fresh.



18)	In order that the flesh is removed easily let the skin soak in the

solution above during one night.



19)	(In some cases you may have to let the skin soak a few days, but

experience will tell.)



20)	In the morning wash the skin off with clear soft water and let it

dry off. When it is still a bit damp you rub it with salt while avoiding that

the salt comes into contact with the fur. As soon as the salt has been absorbed

make a second one.



21)	Fold the skin lengthwise the fur on the outside and roll it and let

it lay down slightly inclined so that the excess of water comes out.



22)	The removal of the flesh will be done the day after. For this you

place the skin with its fur under and place it over a round piece of wood and

scrub or scratch the flesh off from the skin.



23)	Normally one uses a special knife for this but a butcher knife would

do fine as well to remove all remaining pieces of flesh or #cartilage#.



24)	For a rabbit the round wood is a piece about 1.20 meter long and

20cm in diameter which has been split in half lengthwise so as to present a

flat & round surface



25)	MAKE SURE that the bark is off the wood as well. Hard wood is much

better than spruce since spruce type usually stays sticky.



26)	Make also sure that its surface is well smooth and does not have

knots or bumps.



27)	The skin is #racler# with care and uniformly on all its surface. In

order that the skin tanning is well done then the #membrane# that covers the

inside face MUST be eliminated completely.



28)	From time to time you scrape the skin with the back of the knife in

order to soften it.



29)	As soon as the operation is finished, you wash it in a soapy water

and rinse it carefully but quickly then you dry it by hanging it on a

stretcher.



RABBIT SKINNING NEW METHOD:



A)	This method was invented to make skinning as quickly and as simply as

possible.



B)	NO KNIFE is required to remove the skin. One uses only his hands to

turn the skin upside down.



1)	With the thumb and index, pull on the skin at the point of junction

of the hind legs pushing or inserting your index between the thigh & the

skin, then using your finger as a hook pull downward & rip the skin down to

the groin.



2)	Once you have cleaned remove the 2 thighs, grab the skin with both

hands and pull downwards.



3)	Once most of the animal body is cleaned  remove remove the tail and

skin which have remained between the thighs.



4)	Now pull the skin downward again while using your finger by inserting

it between the skin and the flesh in order to facilitate the clearing of the

shoulders.



5)	Once they are completely cleared remove pull on the skin of the legs

which will cut itself off easily.



6)	Before going any further, you MUST remove the shoulders from

the body carcass so as to avoid getting them soiled with viscera, blood and

shit.



7)	Now remove the intestines #viscera. # It is recommended to make the

first cut a bit on the side of the stomach rather than dead on centre, so as to

avoid any perforation to the #viscera.#



8)	Completely remove the stomach muscles by cutting along the "filet" up

to the first ribs.



9)	You also MUST break the pelvic bone with at the thigh junction

in order to facilitate the cleaning operation.



10)	#Degager the "filets"# by cutting along the back bone starting at

the first ribs up to the neck. Proceed the same way by sliding your knife

between the ribs & #"filets".#



11)	Now that your #filets# have been removed from the thorax cage, it is

not necessary to remove them completely, they will do so on their own

with the next step.



12)	With the knife point break the vertebras at the level of the first

ribs then fold the back bone backward.



13)	The body will break in two, the thorax cage containing the

#viscera#, the head & the skin will come together in one piece.



14)	You will recuperate all the rabbit meat but for the small muscles

holding the sides.



4) ADVANTAGES OF SUCH METHOD:



1)	The small side bones which are often a real nuisance in a meal will

not be there at all.



2)	You avoid to touch or manipulate the #viscera#.



3)	You don't cut the head thus avoid bloody mess.



4)	Real time saving for the whole operation.



RABBIT SKINNING & WINTER TIPS:



The Indians do it this way; they attach one hind leg to a tree then they make a

cut from the #anus# inside the thighs down to the heels.



Then they cut the skin around the leg and they would pull off the skin like a

glove using the knife to cut the root of the ears, around the eyes, mouth and

nose.



In winter if the snowshoes hurt your feet, skin a couple rabbit and put

their skin directly under your feet then put your socks over them.



This skin to skin contact gives you an impression of walking over jelly but it

removes the pain of blisters.



CLEANING THE SKIN: 



Make cleaning and drying the skin easier by stretching it on a frame. Do not

make the holes for the cords too close to the edge.



Remove the fat & flesh by scraping the skin, using an edge of bone, flint

or other rock or even wood.



Take care not to cut the skin. Remove every trace of flesh. Ants and other

insects may help you if you lay the skin on the ground. Keep watch that they do

not start to consume the skin itself.



TO CURE FURS:



Stretch the skin as tight as possible and leave it in the sun to dry out. All

the moisture MUST be drawn from it so that it will not rot.



Rubbing salt or wood ash into the skin will aid the process. Do not let the

skin get wet or even damp, until the process is complete.



Do not leave it where it will be exposed to rain or risk a covering with

morning dew. Keep it absolutely dry.



If little or no sun is available, force dry it over a fire, but keep the skin

out of the flames and use only the heat and the smoke which will aid

preservation. Keep it away from the steam from any cooking pots.



TANNING: Chk repeat 



1)	Skin the animal as soon as dead or as possible.



2)	Rake the flesh side of the skin, remove all impurities such as blood,

grease, nerves etc. Be careful for blood spots. Put the skin in clear water for

a few hours to help it.



3)	Place in a tanning solution a: 4 lb of salt + 2 lb of # alum# and 3

gallons of water well-mixed cold not warm nor hot. B: 1 gal of water + 1 oz of

commercial sulphuric acid + 1 lb of salt.



4)	Soften up the skin from time to time & MAKE SURE that it

stays completely under water, if need be use a rock to help.



5)	After 24 hours remove the skin, let it drip off on a rope with

the skin flesh side outward.



6)	Repeat over again the number 4,5,6 



Take the skin off for good, rinse it and wash it in water containing 1/2 cup of

soda a laver# rub, #chiffonner# twist it dry as best as you can.



7)	Let it dry in the air but NOT in the sun for 24 hours.



Stick it to a board, stretch it and nail it down using small nails to help you

in this chore and the hair side under.



When the skin is dry, rub it, #chiffoner#, and make it white using talc powder.

The best skin season runs from October to March.



HOW TO PREPARE THE SKIN (TANNING):  



After having rolled them with salt inside in contact with the fatty part you

wait 24 hours before soaking them in a tanning bath.



After this period you put them for 24 hours in cold water then you stretch them

on a board, the fur inside and the naked parts open toward free air.



Then you will scrape with a knife all the fat and grease so as to make the skin

as clean as possible.



Then prepare a tanning solution made like so: 1 pound #alum# and 1 pound of

coarse salt in 1 gallon of warm water. You soak the skins for 48 hours.



Several times during this time you will stir the whole thing up. At the end of

48 hours you will tend stretch them again on the boards, stretch them as much

as possible and let them dry partially in a shadowy place NEVER in direct

sunlight.



When the skins are 1/2 dry, you MUST stretch them once more so as to

maintain the maximum pliancy and to prevent the leather to harden.



You then put them back in a new batch of solution as described above.



You then draw them out to make them dry completely as shown before on boards,

(fur on the board) then before all the oil runs out of the skin, powder

them with wood's ashes mixed with saw dust well dry.



When the skins are impregnated of these substances you spread a thick sheet of

paper between each skin and you roll them together before putting them under a

weight of some sort.



After a while you beat them with a small stick, once this done you comb the

skin in #sens du poil# till they get back to normal shape.



CAPT. BRION ABC OF TANNING: P348



There are as many procedures of tanning as there are tanners and each one

thinks he has the best one.

So here is one of them. The advantage is that it does not require the uses of

DANGEROUS chemical giving toxic vapours.



However the uses of rubber gloves are strongly recommended since the

products attack your skin.



Use a big container either of wood, glass or plastic but not of metal since the

chemical ingredients would attack the metal.



Next you dissolve 2.5 kg of salt into 40 litres of water which you remove from

the water as soon as it starts to boil.



MAKE SURE that your water is not alkaloid (hard water) the use of

rain water is best.



Next you dissolve 1 kg of #alum# in boiling water and pour this solution into

the first solution while mixing it with a stick, not with your hand. The

solution thus obtained will be used either cold or hot.



Dip the skin into this solution delicately with a stick twice a day. In order

that the skin is totally tanned MAKE SURE that the solution gets well

into the folds of the skin.



The bigger the skin the longer the tanning time. A rabbit skin would

require 2 days and a sheep 5 to 6 days. A dinosaur? = 1 year or 2?



Tanning permits a skin which if it was not treated would rot quickly. It

transforms a skin into a nice fur or leather which is SOFT, SUPPLE, WITHOUT

BAD ODOUR



In the old days the tanning was done while using tannic acid from diverse

plants or trees nowadays most tanner use #alum#.



To get a skin worth a professional you MUST use patience until the skin

is supple.



After having made the skin soaked into the solution for many days cut a small

piece and check if the colour is well uniformed all over the skin. If it is

uniformed then it is OK.



But if there is a difference between this piece from the side and the middle of

the skin then let it soak again one or two more days.



Don't do the usual beginner error which is to remove the skin before it

is uniformly and entirely tanned.



After the tanning is done, remove the skin from the solution and rinse it down

very well using a hose or in a bucket till the water is clear and that all the

fat and impurity are off.



Now place the skin on a support with its fur on the outside. Avoid to place the

fur in the sun. Place it in a cool place with a breeze so that it dries well.



After many days when the skin and the hair are still lightly damp, roll it down

while placing the sides facing one another and let it dry for one night.



If the skin has dried too quickly before it was rolled just damp the interior

side with a sponge and roll it as said.



Work the skin while stretching the skin on a smooth wood bar and twisting it

with your hands. Do this #petrissage# as long as it is necessary until the skin

is real supple.



The Indian women used to bite softly the skins for days, but then again they

had time during the winter and their skins were a marvel of softness.



In order to help you along using your finger tips while massaging the skin

softly use #huile de pied de boeuf# or corn or cotton seed oil along your work

which will penetrate the leather & make it supple.



To clean a dull fur fill a plastic bag with oat meal

flour or saw dust, place the fur into the bag and 

shake the bag well till this dry cleaning is done. 



It works wonders but don't tell the dry cleaner he will go berserk. Next brush

the fur till it swells smooth down the sides of the leather skin using rough

sand paper rolled into a small piece of wood.



The method is the same whether it is a fur or ordinary leather but if you

desire to remove the hairs then do it, before the tanning operation is done.



HAIR REMOVING EASIEST METHOD:



In order to this the easiest method is to let the skin soak during 5

days or more, if the weather is cool into a solution of 500 gram of #chaux#

hydrated mixed with 3 litre of rain water into a wood container (not metal).



Stir it from time to time with a stick and MAKE SURE that this solution

does not come into contact with your skin or clothes since this solution is

#caustique# and risk to burn you. So use rubber glove.



Once the hairs start to peel off, rinse the skin well with soft water and lay

it down on a piece of wood having the ex-hairy surface facing up. #racler# the

skin using the back of your knife to remove the rest of the hair.



RAW LEATHER HAS MANY USES: 



Raw leather is a leather that has not been tanned usually without its fur and

which has been treated by drying and extension. This leather is used to make

sandals soles, shoe laces, tam-tam head etc.



It has this specific property to retract when drying which makes it very good

to hold tightly any object to which it is attached.



To obtain this raw leather first ask the animal to remove its jacket or do it

for him and #echarner le# as we have seen above from all its flesh but do

not wash it.



Eliminate the hair according to the method above or using ashes from hard

wood mixed with water which makes a kind of acid which will help you remove

the hair.



In order to do this method spread a damp paste of these ashes on the hairy side

of the skin and roll the skin with its hair inside. Using a weight maintain the

rolled skin in a solution of ashes and water.



Don't forget to wear rubber gloves while doing this. Let the skin soak into the

solution till the hairs come off easily #racler# the skin with the back of your

knife to remove the hair.



SHEEP CAUTION:



If you are using a SHEEP skin then the removal of the fat is very

important because the skin will spoil otherwise.



So for that skin you will do a first washing without any detergent

product and rinse it many times using rain water then make a fast wash using a

soft soapy product then you twist the water off and put in on a frame to dry.



SKIN DRYING FRAME: 



It is made of 4 thick branches made into a rectangle and strongly held together

by criss-crossed leather tongs.



Its dimension MUST be much bigger than the skin that you want to dry in

order to stretch this skin to its maximum. For a dinosaur use Texas! or

JERUSALEM!



Using a nail or a punch you make regular series of holes all around the skin.



Don't make the holes too close to one another otherwise the skin will

rip apart. For ex. On a sheep skin one would punch holes every 5-6 inch.



Next you attach the skin to the frame using these holes and a leather tong or a

fine rope or salmon fish line going alternatively from the skin to the frame

till all the skin is extended. See pix to help.



Stretch the skin regularly on its sides, bottom and top so that the skin is

well flat.



As soon as the skin is dried you can then #teinter# then you make it supple on

all its surface using a small wooden hammer to pound it down.



Lay the skin over a thick coat of newspaper or on a hard surface but smooth and

you hammer it down with short and oblique (slanted blows).



RAWHIDE PREPARATION: PIX?



Rawhide is prepared more easily. You can dry the green skin in the shade at odd

moments scraping the flesh side as clean as possible with any dull instrument

such as a piece of rock or bone flattened on one side.



The skin may be conveniently held by stretching across the knee that portion

that is being worked.



Or like many of us you may prefer to leave it tacked or pegged to some smooth

surface where hungry birds will in all probability aid your efforts.



If you want the rawhide to be soft, you will probably have to wet the flesh

side.



Allow it to dry and then re-scrape the skin, doing this as many times as may be

necessary until the hide is satisfactory pliable.



Care MUST be taken not to dampen the other side if retention of hair or

fur is desired. If this is too long, it may be clipped.

If you want the hair off entirely, that can be easily enough accomplished when

the pelt is first secured by wetting the coat until it starts to slip,

whereupon you can scrape if off in great clumps.



INDIAN LEATHER TREATMENT: 



The Amerindians OJIBWAY'S and others were tanning the leather according to a

process which is still used all over the world today.



They knew that the bark of some trees such as the oak, the Canadian Spruce,

#Sumach# and #epinette#  produce a substance particularly good to protect &

make the skin supple.



We now know this to be #tannin#.In order to extract this #tannin# the Indians

would boil several pieces of bark into water and would then soak the skins into

this solution 2 to 3 days for a small piece and for many weeks with a bigger

piece such as Bison, Buffalo. Dinosaur = 1 year.



When the tanning was done they would rinse the skins into the next river, then

they would beat, twist and bite the skins till they became supple.



Next they would smear them with animal fat in their case bear fat which would

increase its suppleness. Even today the tanning done with Oak bark is very well

appreciated.



The only draw back that this may have, is that the natural vegetal tanning

gives a dark colour to the skin, but who cares when it is home made by the best

artist around which is you of course.



SKIN SMOKING:  (Smoke-king?)



This method was more specifically used in the case of deer skins.



The skin was removed from its hair with the use of the ashes water noted above

then they would rub the skin with the brain of the animal then they would

stretch it on a frame to dry up by smoking.



This method would then prevent the skins from moulding later on even when damp.

To boot it gives a golden colour and smells real nice especially if the wood

used is from a fruit tree.



This smoking method can be used for most skins of average weight including cow

and horses but especially good for deer skins. The smoked leather is well

sought for by leather artists.



To smoke a skin as the Indians first dig a hole about 60 cm in diameter and 30

cm deep. Burn enough wood so as to obtain a thick layer of ashes and coals.



Next using 4 thin but strong Green branches (don't use dry wood)

construct a kind of support linked at the top by leather tong and onto which

you will then spread the skin which has been previously skinned. (see

above)



MAKE SURE that the skin will not get burned by being too low and too

close to the embers.



Spread some Green wood, onto the fire and watch it over till the leather

obtains the desired colour.



In order to obtain an equal colouring move the skin from time to time. You

simply do this by moving the frame around the fire.



SANDALS HOME MADE:  



Very easy to do. First draw on a piece of cardboard your foot print adding

about 1 cm. all around it.



Next cut into a piece of leather the sole according to your pattern and affix

lacing to the sole thus cut.



Then they will be either nails with rivets or staples or simply laced using

small holes perforated in the sole outside part. translation needed here





Note: That the feet are not similar, so MAKE SURE you cut the

pattern for each foot individually and not of the same pattern.



MAKING YOUR OWN MOCCASIN: APACHE STYLE 



They have many forms and were used traditionally by Indians of North America.

Their style would vary from regions to tribes but they all had several common

points.



The upper part was made from tanned leather usually smoked to increase its

resistance and the sole was made from soft supple leather.

The Apache style is made from 3 pieces. Using a heavy leather which is tanned

and oiled(Oil makes it better waterproof.)



And then you cut the pattern on some kind of paper MAKING SURE that each

foot has its own pattern being different one another.



#Batissez les morceaux du patron# and try it out before reporting it on the

leather.



The pattern is made from the left foot you can reverse it to make it for a

right foot but then it is still better to have a pattern for each

foot.



Since the leather is a thick one, it will then be necessary before sewing it to

pierce holes using a nail or a punch (#alene) or one of those #griffe a

trous# sold in leather and art craft stores.



The stitches will be done at the #point de sellier# and the thread will be

strongly pulled after each stitches so that it penetrates well into the

leather.



The stitching as well as being decorative will also be solid and resistant.



MAKE SURE that the holes pierced into the sole be slightly more spaced

off that those of the #empeigne et du contrefort#.



This difference permits you to compensate or make up for the superiority of the

perimeter of the sole and gives a #effet de fronde#.



Now all you have to do is to make shoe laces as shown above using the same

leather as of the moccasins and then you slide them into the slits made into

the #contrefort# of the shoe.



DRAWING: 



1)	Put your foot on a cardboard, a Kraft paper and draw your footsy with

a pen held vertically then draw the pattern of the sole by adding 3 cm to the

heel and to the tip and 2.5 cm to the sides and proceed, behold to do the same

for the next footsie.



2)	Next you make the pattern of the #empeigne# by adding 0.5 cm to the

largest widest part of the foot (lineAB).



And add 10 cm. to the distance held between your big toe #et le haut du coup de

pied# as seen on line CD.



3)	Next the height of the #contrefort# of the moccasin will be of 10 cm.

and its length will go around the ankle and override it by 1 cm. on each side

of the #empeigne#. Verify the measures #sur le contour du patron# of each

foot.



4)	Using a nail or #alene# pierce holes at 0.5 cm. from the edge of the

soles and of the # contreforts# #et de l'avant de l'empeigne#.



Space them out at equal distance between them with the exception of the sole

where they will be closely made.



5)	#La couture au point du sellier# which will maintain the sole to the

#empeigne# will be started at the centre of the #empeigne# then it will keep on

the edges while the stitching which will join the #contrefort# to the sole will

be started in the middle of the #contrefort#.



6)	To do a stitching #au point du sellier#, thread a needle at both ends

of the thread.



At the first hole #egaliser les 2 longeurs du fil# and introduce the needles

into the following holes going in opposite direction and then keep on going

that way till it's finished.



BABOUCHE: DICK STYLE!



You can also make Babouche that have the advantage that they don't have any

difference between the right or left foot.



Cut 4 soles into some thick leather following the size of your foot. Pierce

holes all around and sew 2 thickness together.



Into some leather #decouper le dessus du pied et les contreforts# following the

PIX #?.



#Couser chaque dessus du pied sur l'envers starting par la pointe# into the

same holes that those made for the soles. All you have now to do is to add the

heel band.



LEATHER SHOE LACES:



They are made from raw leather cut into thin circular (spiral) stripes

done directly from the skin. Place the skin on a flat board and use a nail

which will form the centre of the #spiral#.



Using a sharp knife held vertically trace the #spiral# starting from the

outside going toward the centre. Once the #spiral# is all done then you unroll

your new shoe lace work of art.



Since nothing is stronger than a rope with 3 thread one can use this leather

laces to make himself one.



If one has the time and needs a rope, all the has to do is to lay the skin flat

on the ground and wet the skin a bit to help you when cutting it.



LEATHER MAKING:



After cleaning, place the skin in water and weight it down with stones. Leave

it until the fur can be pulled out in handfuls-usually 2-3 days.



Make a mixture of animal fat and brains, simmered over a fire till they form an

even consistency. Scrape the skin on both sides, removing hair, and grain. Keep

it wet.



Work sitting down with the skin over your knees. Keep manipulating it. Work the

fat and brains mixture into the inner side of the still- wet skin, stretching

and manipulating as you do so.



Dry the skin in the smoke over a fire, keeping it well away from the flames.

The smoke sets up a reaction with the solution you have rubbed in to make the

skin supple.



LACES AND LASHING: 



Hide is one of the best materials for lashing and for thongs to lace things

together.



Cut short laces straight from the skin, along its length. To obtain a greater

length cut in a spiral-keep the width consistent or the thronging will have

weak points



SINEW AS THREAD:



The hamstring and the main sinews of the legs-especially of the larger

animals-can be dried and used as thread to stitch hides together for shelter

and clothing.



Recognise them by their strong white cord-like appearance. You can also

function of the bladder is to hold water, so naturally the bladder of a large

animal can be used as a water carrier-so can the stomach. Tie off the openings

to seal them.